MAX Power HYD325_250 Hydraulic Tunnel Thruster User Manual
Page 8
MANUAL SUPER POWER Series 325 HYD Model 250 01/05/2004
10)
MAINTENANCE
In order to ensure peak performance from your SUPER POWER, the tunnel, the leg and the
propellers must be kept clean.
IMPORTANT: In order to prevent chalky deposits, which cause damage to the oil seals, we
recommend cleaning the shaft and the oil seals first, then applying a layer of
silicon oil before assembling the propellers.
ANNUAL BASIS: CHANGE the anode (if necessary).
CHANGE drive leg oil, if classic (bronze) leg.
CHECK the oil and the hydraulic filtration circuit (only if necessary).
EVERY 5 YEARS:
DRAIN hydraulic oil system and change the filter and refill.
THE MAX-POWER TEAM WISHES YOU SUCCESSFUL MANOEUVRING AND
ENJOYABLE CRUISING.
IT IS IMPORTANT TO KEEP THIS MANUAL ON BOARD!
7