Newport Brass 75-27 - Manual

Installation Instructions
Open Towel / Tissue Holder
Model No. 75-27
1. Drill hole in wall at desired location using the appropriate drill size:
· Wood Screw (#6 x 2”) - use: 3/32" Drill
· Toggle Screw (6-32 x 3”) - use: 3/8" Drill
2. Fasten BASE (1) to wall using either WOOD/TOGGLE SCREWS (2). (See Fig. 1)
3. Place POST (3) into BASE (1) at the appropriate height specified and secure into place with set
SCREW(4). (See fig.2)
4. Place ESCUTCHEON (3) over BASE (1). Place POST (4) over ESCUTCHEON (3). Secure into place
by tightening the SETSCREW (5). (See Fig. 2)
Fig. 3
3
4
1
5
Fig. 1
2
1
Fig. 2
1
3
4
2”
Recommended Installation by a Professional Contractor
(949)417-5207
NWP-75-27 Santa Ana CA 92705 12/5/2011
www.brasstech.com