Newport Brass 13-12 Towel Ring_Garment Hook - Manual

Towel Ring / Garment Hook
Installation Instructions
Model No.
13-09, 13-12
Recommended Installation by a Professional Contractor
1. Locate BASE (1) on mounting surface and mark hole location. (See Fig. 1)
2. Drill hole in wall at point marked using the appropriate drill size:
· Wood Screw (#10 x 1-3/4”) - use: 1/8" Drill
· Toggle Screw (10-24 x 3”) - use: 9/16" Drill
3. Fasten BASE (1) to wall using either WOOD/TOGGLE SCREWS (2).
(See Fig. 2)
4. Place ESCUTCHEON (3) onto the BASE (1). (See Fig. 3)
4a. Towel Ring: Slide END POST (4) onto BASE (1) and secure into place with
SETSCREW (5). (See Fig. 4)
4b. Garment Hook: Slide END POST (4) onto BASE (1) and secure into place with
SETSCREW (5). (See Fig. 5)
Fig. 1
(949)417-5207
AMS-13-09 Santa Ana CA 92705 2/11/04
www.brasstech.com
1
3
Fig. 3
Fig. 4 Fig. 5
4
4
5
1
5
1
Fig. 2
1
1
2