Prokit's Industries MA-1203LI - Manual (Page 2)

LED Table Clamp Magnifier Lamp LED Table Clamp Magnifier Lamp
A. Before use, remove all packing foam around the lamp.
LED Table Clamp Magnifier Lamp
Model No.:MA-1203LA/LF
Thank you very much for purchasing our LED Table Clamp
Magnifier Lamp. The Magnifier Lamp is ideal for precise work in
home, office and workshop as well as a lot of other important
places. Before using the Magnifier Lamp, please read the
following instructions carefully.
Features:
•
Complies with CE safety standard
• The glass lens provides the high transmittance and not
easy to scratch
• Light source by 48pcs white LED, low temperature and
long life.
• Standard mount: Desktop clamp
• Power supplied with electronic rectifier provides even
more stable performance
•
The universal joint neck design allows the lens face to
any side you prefer.
• Adjustable arm for easy positioning where it is most
needed.
Specification:
A. A. Magnifier:∅127mm diameter, 3 diopter
B. Voltage: AC 110V-120V 60Hz / 220-240V 50Hz
C. Light source: 48PCS white LED
D. Supplied with electronic ballast
How to use:
B. Put the lamp on the horizontal table.
C. Insert the plug into a conveniently located electrical
socket.
D. Switch on using the ON/OFF switch located on the
surface of the base.
E. To place the head in the desired position.
Caution for safe using:
A.
Indoor use only.
B. Environment temperature:-20°C~40°C.
C. Humidity:≤95%.
D. Never disassemble the magnifier lamp unless you are a
qualified electrician.
E. Plug must be taken out while repairing the magnifier
lamp.
F. Never leave the lens unattended in direct sunlight or
where light can shine through it. This constitutes a fire
hazard.