Prokit's Industries MT-4012 - Manual (Page 2)

1. Safety Information
● Please read the following information carefully
before using the meter.
● Safety symbols:-
Danger/Important Information prompt.
Comply with CE safety standards.
This instrument is compatible with the following
standards:
EN61326-1
EN61010-1
EN60825-1
Warning!
Do not point laser directly at eye or
indirectly off reflective surfaces.
2. Precautions
● After abrupt ambient temperature changes,
allow instrument temperature to stabilize for 30
minutes before using for measurement.
1
● Avoid operating near strong electromagnetic
fields such as arc welders, induction furnaces,
etc.
● Do not expose thermometer to excessive
ambient temperatures.
● Keep the thermometer clean and avoid getting
dust into the detector’s optics.
● Do not use solvents to clean the meter.
3. Feature Locations
2