Prokit's Industries MT-4025 - Manual (Page 2)

Introduction:
The MT-4025 DC Voltage / Current Datalogger is a recorder unit
comes with USB connector & window software for easy
measured data monitoring and recording by your computer
Accessory:
Hanger x 1 set
Voltage /current connecting wire x 2pcs)
User’s manual x 1pcs
Record Monitor software CD x 1pcs
USB transmit cable x 1pcs
Warning
!
To avoid electrical shock or personal injury, follow these
guidelines:

Before using the recorder inspect the case. Do not use the
recorder if it appears damaged. Look for cracks or missing
plastic. Pay particular attention to the insulation around the
connectors.
 Disconnect the connecting wire from the recorder before
opening the case.
 Be careful use at any circuit, hide high voltage and current in
circuit may cause strong electric shock and health to be
injured.
 Don't exceed recorder specification max input voltage or
current value.
 When the case of the recorder is opened, make sure not to
use the recorder.
 In front of measuring the voltage or the current, should be first
to correct insert the connecting wire the input of the recorder.
 When using MT-4025 voltage / current recorder measure
voltage & current at the same time, both black leads must
connect to negative input terminal together. (Refer Fig. 1)
1