Prokit's Industries PT-1441 - Manual (Page 4)

PT-1441 User’s Manual
www.prokits.com.tw 3
d) Under abusive conditions, liquid may be ejected from the battery; avoid to contact the
liquid. If contact accidentally, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
e) To ensure the maximum battery life and optima performance, always charge the battery
before use.
f) Please check if the tools still have power when not in use for a long time. If it still work,
please use it until the battery discharge completely
g) Battery will discharge automatically when not in use for a long time, if possible, please
recharge the battery every 50 days
h) Please keep ambience dry and proper temperature where the power tool was storage,
otherwise, It will speed up the battery discharge. Hi-humidity will damage the battery
and will make power tool rust
6) Service
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
Special Safety Advice for Cordless Drill
Only plug the Battery Charger in 230V for PT-1441F type and 120V for PT-1441A type mains.
Recharge the Battery only with the provided charger. Before starting any work on walls, floors or
similar, make sure that all power lines in the work area are switched off at the main switchboard.
Inspect the proposed drill holes location for any utility lines (e.g. water, gas, power) before drilling.
Use a suitable device such as a metal or electricity line detecting device. If in doubt contact a
qualified electrician or your utility provider. Both tools and work-pieces can heat up considerably
during the drilling operation. Allow a sufficient period of cooling before handling. Wear appropriate
gloves.
Safety Advice for Rechargeable Battery and Charger
Use only the battery provided with the drill or a replacement rechargeable battery from Pro’sKit
and the provided charger. Only plug the battery charger in 230V for PT-1441F type and 120V for
PT-1441A type mains. Protect battery and battery charger from humidity. Do not operate the
battery charger outdoors. When it is not in use and before cleaning and servicing, disconnect the
battery charger from the power supply. Take special care of the battery. Avoid dropping it onto any
hard surface and do not subject it to pressure or any other form of mechanical stress. Keep the
battery away from extreme heat and cold. Do not open or attempt to repair the battery or the
battery charger. If any parts are defective, have them repaired by a qualified technician or send
them to our service department for repair. Only charge the battery at an ambient (surrounding air)
temperature between 10ºC and 40ºC. A charged battery can be used to power the machine under
ambient temperature conditions between 0ºC and 50ºC.When not in use, store the battery in a dry
place between 10ºC and 30ºC.
Important! Danger! Never short-circuit the battery or expose it to moisture. Do not store it
together with any metal parts which could short-circuit the contacts. The battery could overheat,
start burning or explode.