ZMODO ZMD-DC-SBN6 16 Channel Standalone DVR - Manual (Page 14)

13
Note: IE side supports 5 auxiliaries setting. Local side supports 3 auxiliaries.
2) Motion Detection Settings
Motion detection settings include sensitivity and area. The sensitivity includes three levels: High, Mid, and
Low. Please select <Tool Bar>→<System>→<Video>→<Motion Detection> to set.
Mouse Operation: Drag mouse on screen to create grid.
Panel Operation: There are totally 16 X 12 blocks in screen. Move highlight icon among the blocks by using
[ ]、[ ]buttons. Please follow these steps below to set:
1.Move highlight icon to one of the blocks you want to create by using [ ]、[ ] buttons. Press [OK] button
to confirm. The created block will be in highlight blue.
2.Press [Fn] button to copy the current configuration, and press [Direction] button to copy to the relevant
grid. Press [Fn] button again to exit copying.
3.Repeat steps 1 and 2 to set the second area.
Press [ESC]to exit setting.
In the Motion Detection Settings, users are free to select a certain day of the week or a period of time within a
future day(Smallest unit is one hour. One block indicates one hour). System provides a recording option for
hours every day or a week day.
3) Mask Setting
Mask setting function can make some regions of the image invisible. These regions in preview image and
playback image areall filled with black pixels. The method to set maskis similar with motion detection setting.
You can right click mouse in the area where mask have set to cancel this function. You can stop setting when
you right click mouse in one area where havenomask setting. There are four regions can be set in one
channel.
5 Playback
*File Search
Table IV 1 PTZ Operation Description
NO.
①
②
③
④
⑤
Name Discription
Direction
Click the arrow icons to control direction of PTZ.
Click the center icon to call sequence or run scanning.
Please refer to the PTZ manual for details of PTZ scanning mode.
Speed
Advanced Click and to show/hide the advanced setting screen
(the part under the blue bar ).
Set the turning speed of PTZ camera.
Focus
Click to focus-in and focus-out (it is disabled for cameras with
automatic focus).
Iris
Click to make the image brighter or darker (it is disabled
for cameras with automatic iris adjustment).
⑥ Auxiliary
Open/close auxiliaries.
Click to open and click to close. Different functions
respond to different protocols. The auxiliaries include light,
rain brash, and power etc. please refer to PTZ manual for details.
NOTE: Up to 2 auxiliaries are supported on device side.
Up to 4 auxiliaries are supported on client web side.
⑦ Zoom Click to zoom in/zoom out (it is disabled for cameras with automatic focus).
⑧ Preset
1, Select the preset number in the preset window.
2, Position the camera as desired position. Save the position by clicking .
Repeat the step 1and 2 to reset the desired position.
Call preset: Select the preset number you want to call, and click on the go
to button . Clear/reset preset: Select the preset number you want to
clear/reset and click on the clear button .
⑨ Sequence
Sequence is a running route of camera that passes through multiple
presets. Set sequence:
1. Select preset number you want to call. Click on set button .
2. Repeat step 1 and 2 to add the other presets till finishing.
Click button to end setting. Click on button to clear sequence.
⑩ Track
Track is a continuous running route of camera.
Set track:
1. Click on to start setting.
2. Move camera as the track and pattern you want it to run.
3. Click on again to finish setting.Click on to run track and click
again to stop running.
Note: Whether Track is supported or not is depending on the type of PTZ.