Powersolve PS5 Series - Manual

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]
www.powersolve.co.uk
DC-DC Converter
PS5 Series
5 - 6 Watt Wide Input
PCB Mounting
Single & Dual Outputs
Features
• 5 - 6 W Isolated Output
• 4 : 1 Input Range
• Regulated Outputs
• Continuous short circuit protection
• Efficiency to 80%
• Pi Input Filter
• DIP-24 package
INPUT
Input Voltage Range
9 - 36V (PS5-24-xxx versions)
18 - 72V (PS5-48-xxx versions)
Input Filter Pi Type
OUTPUT
Voltage Accuracy
±2.0% max.
Voltage Balance (Dual) ±1.0% max.
Temperature Coefficient ±0.05% / °C
Short Circuit Protection Continuous
GENERAL
Efficiency
See Table
Isolation Resistance 10 9 Ohms
Switching Frequency 200KHz min.
Operating Temperature Range -25°C to +71°C
Case Temperature (Plastic Case) +95°C max.
(Copper Case) +100°C max.
Cooling Natural Convection
Storage Temperature Range -40°C to 100°C
Dimensions 1.25 x 0.80 x 0.40 Inches
31.8 x 20.3 x 10.2 mm
Weight 12.5g
ISOLATION VOLTAGE
1.5KVDC min.
Standard or suffix “HM” Models
3KVDC min. [4] Suffix “H” Models
CASE MATERIALS
Standard Models
Non-conductive Black Plastic
Suffix “HM” Models [5] Black Coated Copper with
Non-conductive Base
Electrical Specification
Typical at nominal line, full load & 25°C unless otherwise stated.
NOTE:
1. Line regulation measured from High Line to Low Line.
2. Single output load regulation measured from Full Load to 10% Load.
3. Dual output load regulation measured from Full Load to 25% Load.
4. Non-conductive Black Plastic only.
5. Suffix “HM” 1.5K VDC instead of 3K VDC Isolation.