Powersolve PSE60C Series - Manual

Powersolve Electronics Ltd. Units 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: [email protected]
www.powersolve.co.uk
Desk Top Power Supplies
PSE60C Series
60 Watt Switch Mode
Universal AC Input
Features
• Optional output connectors
• 100% burn-in
• Wide input voltage 90 to 264 VAC
• Input surge current protection
• Overvoltage protection
• Overcurrent protection
INPUT
Input voltage
90 to 264 VAC
Input Frequency 47 to 63 Hz
Input current 1.6A max at low line
Safety ground leakage current 0.75mA max @ 240 VAC 50Hz
OUTPUT
Output voltage
See Rating Chart
Output current See Rating Chart
Output power range 0-60 watts
Ripple 1% peak to peak maximum
Overvoltage protection set at 112-132% of its nominal output voltage
Overcurrent protection All outputs protected to short circuit conditions
Temperature coefficient All outputs ±0.04%/°C maximum
ENVIRONMENTAL
Operation temperature
0°C to +70°C
Derating Derated from 100% at +40°C linearly to 50% at +70°C
Storage temperature -40°C to +85°C
Relative Humidity 5% to 95% non-condensing
GENERAL
Efficiency 83%
typical
Hold-up time 16 m/s low line
Line regulation ±0.5% maximum at full load
Inrush current 15 amps @ 115 VAC, or 30 amps @ 230 VAC at 25°C cold start
Withstand voltage 4242V DC from input to output, 2121DC from input to ground,
500V DC from output to ground
Insulation resistance 50 Mohm minimum from output to ground
Mean time between failure 100,000 hours minimum at full load at 25°C ambient
EMI requirements Meets conduction limits of (a) FCC 20780 CLASS B
(b) CISPR CLASS B
Safety approvals ul, cUL60950-1, ITS/GS(EN60950)
Electrical Specification
The PSE60C series of AC/DC switching power
supplies offer 60 watts of continuous output power.
All models meet CISPR class B and FCC class B
emission limits, and are designed to comply with UL,
cUL and EN60950 requirements.