Approved Optics Approved JUNIPER XENPAK-1XGE-LR - Manual

Approved Optics, Inc. www.ApprovedOptics.com
Page 1 of 5
XENPAK-1XGE-LR-A
XENPAK-LR 10GB Module
1310nm, 10K, SMF, SC RoHS6
XENPAK-1XGE-LR-A
10GBASE XENPAK Transceiver
Features
• XAUI Electrical Interface: 4 Lanes @ 3.125Gbit/s
• Hot Z-Pluggable
• SC-Duplex Optical Receptacle
• MDIO, DOM Support
• Cooled 1.5μm DFB-LD
• PIN Photo-detector
• Operating Case Temperature: 0 to 70 °C
• Compliant to IEEE 802.3ae 10GBASE-LR Application
• Compliant to XENPAK MSA
• Mechanical Footprint: 4.76”Lx1.42”Wx0.46”H
DESCRIPTION
General
Approved Optics 10GbE XENPAK transceiver module XENPAK-1XGE-LR-A
is a hot pluggable in the highly integrated Serial optical transponder module for high-speed,
10Gbit/s d a t a t r a n s m i s s i o n a p p l i c a t i o n s . That i s u s a b l e i n t y p i c a l
r o u t e r l i n e c a r d applications, Storage, IP network and LAN and compliant to XENPAK
MSA. The XENPAK-1XGE-LR-A is a fully integrated 10.3Gbit/s optical transceiver module
that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and
DeMux with clock and data recovery (CDR). This transceiver line uses a cooled 1310 DFB
Laser Diode to achieve 10K over standard single mode fiber as per 10GBASE-LR
of the IEEE 802.3ae specification.