S&B Filters Cold Air Intake Kit - Cotton Filter 75-3035 - Manual

8/26/2008
REV-C
(909) 947-0015 Telephone - (909) 947-0603 Fax
www.sbfilters.com
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
(Over)
S&B P/N 75-3035
2001-2004
Chevrolet Corvette
5.7L-V8
(excluding 2003-2004 Z06 models)
QTY PARTS LIST QTY PARTS LIST
1 4” - 1.25” Adapter 2 #56 Hose Clamp
1 3.75” - 2” Adapter 4 #10 Washer
1 Intake Tube 2 Bent “L” Bracket
1 Air Filter Shield 4 #10 Sheet Metal Screw
1 CARB Sticker 1 Air Filter
3 #64 Hose Clamp
TOOLS REQUIRED
Drill & 1/8” drill bit
Scriber or pencil
Flat head screwdriver
9. Pull up and remove the pins that secure the
OE air box to the vehicle.
1. Turn off engine and disconnect negative battery
terminal.
2. Disconnect the electrical connection at the
MAF Sensor
3. Loosen the hose clamps at the throttle
body and just before the MAF sensor and
remove the OE intake tube.
5. Disconnect the CCV hose from the OE air
box.
8. Assemble the S&B intake tube and the
MAF Sensor as shown below.
4. Carefully pull up on the clamp assembly for
the MAF electrical connector and move it to
the side.
6. Carefully pull up and remove the OE air
box assembly.
7. Loosen the hose clamp and remove the
MAF Sensor from the OE air box.