Driverack, Appendix, A.6 specifications – dbx DriveRack PA+ User Manual
Page 34
A.6 Specifications
ANALOG INPUTS:
Number of Inputs:
2 Line inputs
1 RTA Mic input
Connectors:
2 Female XLR line inputs
1 XLR RTA Mic input
Type:
Electronically balanced, RF filtered
Impedance:
> 40 k
Ω
Max Input Line level:
+20 dBu
Input CMRR:
> 45 dB
RTA Mic Phantom Voltage:
+15 VDC
RTA Mic EIN:
< -117 dBu, 22 Hz-22 kHz, 150
Ω
ANALOG OUTPUTS:
Number of Outputs:
6 Line outputs
Connectors:
Male XLR
Type:
Electronically balanced, RF filtered
Impedance:
120
Ω
Max Output Level:
> +20 dBu
CMRR:
> 45 dB
Alignment Delay:
10ms per channel (60ms total)
A/D PERFORMANCE:
Type:
dbx Type IV™ conversion system
Dynamic Range:
110 dB A-weighted
> 107 dB unweighted
Type IV dynamic range:
123 dB with transient material,
A-weighted, 22 kHz BW
121 dB with transient material,
unweighted, 22 kHz BW
115 dB typical with preset material,
A-weighted, 22 kHz BW
Sample Rate:
48 kHz
D/A PERFORMANCE:
Dynamic Range:
112 dB A-weighted
110 dB unweighted
Sample Rate:
48 kHz
SYSTEM PERFORMANCE:
Dynamic Range:
110 dB A-weighted,
>107 dB unweighted,
THD+N:
0.004% typical at +4dBu, 1 kHz, 0 dB input gain
Frequency Response:
20 Hz – 20 kHz, +/- 0.5dB
Interchannel Crosstalk:
<-110 dB, -120 dB typical
Crosstalk input to output:
<-100 dB
POWER SUPPLY:
Operating Voltage:
100-120VAC 50/60 Hz - EU: 220-240 VAC 56/60 Hz
Power Requirements:
25 Watts
PHYSICAL:
Weight:
5.5 lbs.(2.5 kg) Shipping weight 7 lbs. (3.18 kg)
Dimensions:
1.75” (4.4cm) H x 5.75” (14.6cm) D x 19” (48.26cm) W
Section A
Appendix
30
DriveRack
®
PA+