3B Scientific Connector Box (230 V, 50__60 Hz) - Manual

3B SCIENTIFIC® PHYSICS
1
Connector Box (230 V, 50/60 Hz) 1009955
Connector Box (115 V, 50/60 Hz) 1009954
Instruction sheet
09/12 SD
1 8-pin miniDIN socket
2 Analogue output 2
3 Analogue output 1
4 Socket for plug-in power supply
1. Safety instructions
The connector box conforms to all safety regula-
tions for electrical measuring, control, monitoring
and laboratory equipment, as specified under
DIN EN 61010, Section 1. It is intended for opera-
tion in a dry environment, suitable for the opera-
tion of electrical equipment and systems.
Safe operation of the equipment is guaranteed,
provided it is used correctly. However, there is
no guarantee of safety if the equipment is used
in an improper or careless manner.
If it may be assumed for any reason that non-
hazardous operation will not be possible (e.g.
visible damage), the equipment should be
switched off immediately and secured against
any unintended use.
• Only use this equipment in dry rooms.
• Do not apply any external voltage to the
output sockets (2 + 3).
• Only use with the supplied plug-in power
supply
2. Description
The connector is designed to connect the photo
gate (1000563) or laser reflection sensor
(1001034) to digital counters equipped not with
8-pin miniDIN sockets but with 4-mm-input
sockets.
When used with the photo gate (1000563) or
laser reflection sensor, the counter should be
connected to the connector box with the black