ADATA Nobility PD17 - Manual (Page 12)

- 12 -
Note 1: Users are asked to re-plugin the USB Flash Disk after Format.exe is finished to
activate these selected functions.
Note 2: If Security Function is enabled, the login program (Lock.exe) for security
function will be loaded into the USB Flash Disk. Otherwise, Lock.exe will not be
generated.
Note 3: If USB Boot function failed, please check whether the boot files exist or not.
For Windows 98, please make sure the directory :\COMMAND\EBD exists. Otherwise, it’s
required to create the directory, then copy and save boot files into this directory before
formatting USB Flash Disk as a Boot Disk.
Note 4: If users have set the Security Area from the Format.exe and run the program
again with selecting “Quick Format” or “Complete Format”, all the data previously
stored in the Public Area and Security Area will be cleared when format completed.
Lock.exe
Lock.exe Interface
The “Lock.exe” is the interface users get to access the Security Area. Having set the
Security Area, users can run “Lock.exe” to “Unlock” the Security Area then having the right
to access it. Once all the data processing has completed, users then select “Locked” to
secure their personal data in the Security Area. To run the “Lock.exe”, just double
click .
Note: Please notice that “Lock.exe” is the only interface to access to Security Area if you have
set it. Without this program, you won’t be able to access the Security Area. If you have deleted
“Lock.exe” carelessly, please copy it from the Driver CD. You can also reset Security Area from
“Format.exe”, but you will lose all your data previously stored in the USB Flash Disk.
Lock.exe