ADATA Nobility PD7-120X - Manual (Page 8)

Hi-Speed USB Portable Flash Disk User’s Manual Guide
Page 8
Running the USB Flash Disk Utility Program
Note: The USB Flash Disk Utility program only runs if it detects the correct device.
The program will not respond if it detects a different factory configured device
even if it is also of the same manufacturer device product.
Follow the steps below to run the program:
1. In order to run the USB Flash Disk utility, it is required that you first plug-in
the device and then double-click the program shortcut in the desktop screen.
Otherwise, the program will not open if it cannot detect the proper device.
2. The USB Flash Disk Utility menu window will appear. The password features
will only be enabled if you partition the device to two partition disks. If there is
a password already set on the disk, the password check dialog box will first
pop-up to prompt for the password before you can enter the main menu.
Note: The Password Check dialog box will only pop-up if this option is enabled
and when you plug-in the device and there is a password set inside. You can
disable this auto pop-up function by clicking the Option button in the main
menu of the utility program.
3. You will also see the USB Flash Disk utility icon on the right side of the taskbar
every time you plug-in the device. You can also double-click this to open the
utility. You can click on the Option button to disable the tray icon appearing on the
taskbar when you plug in the
device.