StreetGlow Lightning Neon Tubes - Manual

CONTENTS:
1- 15” Neon Accent Tube
2- 1/2” Screws
2- Wire Connectors
INSTRUCTIONS:
1) Plug in cigarette lighter
adapter
2) Install in desired
location with screws
provided.
3) Enjoy!
For greater
visual Impact,
tube should
be exposed in
order to view
full lighting
effect.
**FOR PERMANENT
INSTALLATION:
1) Cut off cigarette lighter
adapter.
2) Connect (+) red wire to
toggle switch provided.
3) Connect (-) black wire to
ground.
4) Connect a constant 12V
power source to switch.
5) Make sure all connections
are properly insulated with
electrical tape.
6) Install in desired location
with screws provided.
7) Enjoy!
** Professional installation
recommended - see an
Authorized Street Glow ®
Dealer
FOR INTERIOR
USE ONLY
STREET GLOW INC.
WAYNE, NJ 07474 USA
www.streetglow.com
Call for a dealer near you:
1-888-AUTO-NEON
The Original
Auto-Neon ® Accessories
15”
LIGHTNING
NEON
ACCENT
KIT
15”
CIGARETTE
LIGHTER
ADAPTER
BUILT-IN
TRANSFORMER
MOUNTING
BRACKET
MOUNTING
BRACKET
8’ CORD
LIFETIME WARRANTY
Street Glow Inc. warrants the replacement
of Street Glow products due to defects in
material and/or workmanship according
to the following conditions and limitations:
1) Broken glass is not covered regardless.
2) Labor and transportation charges.
3) Warranted for as long as the original
purchaser owns the product.
4) Proof of purchase is required to
validate warranty.
5) all warranty claims are to be handled by
selling agent(s).
6) Normal wear, accident, abuse, neglect,
improper installation, not used for its
intended purpose are not covered under this
warranty. This warranty is limited to replacing
the defective part without charge and the
company in no event be responsible for
the consequential or special damages. This
warranty gives you specific legal rights and
you may also have other rights which vary.
8.75”
END VIEW
Variable
Sensitivity
Switch
3/4”
HIGH IMPACT
RESISTANT
PLASTIC
TUBE
NEOVAX®
PROCESSED
NEON BULB
CONTENTS:
1- 20” Neon Accent Tube
2- 1/2” Screws
2- Wire Connectors
20”
LIGHTNING
NEON
ACCENT
KIT
20”
CIGARETTE
LIGHTER
ADAPTER
BUILT-IN
TRANSFORMER
MOUNTING
BRACKET
MOUNTING
BRACKET
8’ CORD
FOR INTERIOR
USE ONLY
13.75”
NEOVAX®
PROCESSED
NEON BULB
3/4”
HIGH IMPACT
RESISTANT
LEXAN®
TUBE
The Original
Auto-Neon ® Accessories
INSTRUCTIONS:
1) Install in desired
location with screws
provided.
2) Plug in cigarette lighter
adapter
3) Enjoy!
**FOR PERMANENT
INSTALLATION:
1) Install in desired location
with screws provided.
2) Cut off cigarette lighter
adapter.
3) Connect (+) white wire
to a switch.
4) Connect (-) black wire
to ground.
5) Connect a constant 12V
power source to switch.
6) Make sure all connections
are properly insulated with
electrical tape.
7) Enjoy!
** Professional installation
recommended - see an
Authorized Street Glow ®
Dealer
For greater
visual Impact,
tube should
be exposed in
order to view
full lightning
effect.
END VIEW
Variable
Sensitivity
Switch