Factory Direct Hardware Hansgrohe 06462 Talis S - Manual (Page 4)


Install baseplate 06473XX0 (not
included, optional)
Position the baseplate and gasket on the faucet deck.
From under the sink, install the mounting flanges and
tighten the mounting collars by hand.
The baseplate can be used on a kitchen sink with fewer
than three holes. Remove and disgard the threaded studs
on the bottom of the baseplate. Align the baseplate and
the gasket visually.
Install the faucet:
Position the faucet and sealing ring on the mounting
surface.
Install the fiber washer, metal washer and mounting nut.
If the mounting surface is less than 1⅜", install the gray
plastic support.
English