Factory Direct Hardware Hansgrohe 04214 - Manual (Page 3)

3
Installation
Remove the cover, collar, and sealing
ring from the air gap.
Rotate the nut clockwise to lower it on
the air gap.
Install a 5/8" dishwasher drain hose
on the 11/16" leg. Secure it with a
hose clamp Tighten the clamp.
Install a 7/8" garbage disposal hose
to the 15/16" leg. Secure it with a
hose clamp. Tighten the clamp.
Insert the air gap up through the hole in the mounting surface.
Install the sealing ring and collar.
Approximately 2 3/8" of the air gap should extend above the
mounting surface.
Tighten the nut.
Push the cover into place.