Zanussi ZRB934FX2 - Manual (Page 47)

Control panel
1 2
5 4 3
1 Temperature indicator LED
2 Fast Freeze indicator
3
Door sensor
4 Fast Freeze button
5
Temperature regulator
Switching on
Insert the plug into the wall socket.
Temperature regulation
To operate the appliance, proceed as follows:
• touch the temperature regulator button until
the LED corresponding to the required tem-
perature lights up. Selection is progressive,
varying from 2 to 8°C.
At first button touch actual setting LED
keeps blinking.
Any time the button is touch the set tempera-
ture is moved to 1 position . Corresponding
LED will blink for a while.
Touch the setting button until the required
temperature is selected. The set will be fixed
coldest setting: +2°C
warmest setting: +8°C
A medium setting is generally the most suitable.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
appliance depends on:
• room temperature
• how often the door is opened
• quantity of food stored
• appliance location.
Fast Freezing function
You can activate the Fast Freezing function by
pressing the Fast Freezing button.
The LED corresponding to the symbol Fast
Freezing indicator lights up.
You can deactivate the Fast Freezing function
by pressing the Fast Freezing button again.
The Fast Freezing indicator will light off.
Important!
This function stops automatically after 52
hours.
Door sensor
The appliance is equipped with an optical sen-
sor to detect door open.
Do not put anything in front of the correspond-
ing window, to maintain proper functioning.
First use
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap so
as to remove the typical smell of a brand-new
product, then dry thoroughly.
Important! Do not use detergents or abrasive
powders, as these will damage the finish.
47
www.zanussi.com