Crown Audio PIP-Lite Module - Manual (Page 12)

Networked PIP Series
page 12 Reference Manual
2.2 PIP-USP3
Figure 2.3 PIP-USP3 Front Panel Controls, Indicators and Connectors
(Note: Actual Product Artwork May Vary Slightly)
Please refer to Figure 2.3.
A Balanced Audio Input Connector
3-pin removable barrier strip connector for each audio channel.
B. AUX Connector
AUX input, AUX output, and Listen Bus.
C. Preset Indicator
Signals the number of the current preset, if active, by flashing a series of flashes equal to
the current preset number. See Section 4.1.2.
D. Reset/Preset Switch
Used to change presets, restore settings to factory default or restore all the presets to the
factory defaults. During operations of the switch, the Data indicator flashes as an aid to the
user. See Section 4.1.11.
E. Data Indicator
Flashes when the PIP-USP3 receives a valid command that is addressed to the PIP-USP3.
See Section 4.1.1.
F. Network Connector
The network connector is a standard RJ-45 connector that allows the PIP-USP3 to connect
to an Ethernet network. Connection is made using a standard Category 5 cable to a network
switch port. The Link Activity LED indicates data activity on the network line. The 100 MB
LED indicates that the data is at 100 Megabits. See Section 4.1.3.
G. Mounting Holes