Crown Audio SMX-6 Backup Retro Module - Manual (Page 4)

8. Place one of the enclosed version labels over the existing version label.
The version label is located on the back panel near the power cord. If the
old version label is missing, place the new label near the power cord.
9. Replace the top cover and screws.
10. Apply AC power.
11. Test the modification
11.1 Establish communication using the IQ software.
11.2 Ensure that the unit accepts commands by downloading settings.
11.3 Perform a Roll Call to ensure that the settings are properly saved in
the unit.
12. Test the memory backup
12.1 Establish communication using the IQ software.
12.2 Ensure that the unit accepts commands by downloading settings.
12.3 Wait five seconds.
12.4 Remove AC power from the mixer for at least 30 seconds, then
restore power to the mixer.
12.5 Perform a Roll Call or Upload to ensure that all settings are properly
saved in the unit.
Technical Support
Call Crown Technical Support at (219) 294-8200 or (800) 342-6939 or Fax (219)
294-8301.