Breaching Technologies Explosive Breaching Kit - Manual (Page 9)

The BTI Explosive Breaching Stand is designed to hold the target door. At no time
should the explosives come in direct contact with the metal frame or any of the metal
components holding the door.
The frame is designed to withstand standard explosive door charges. This means that any
reasonable door charge that would defeat a two inch solid core wood door or a light metal
door can be used.
Set-Up
Attach the Freestanding Leg Kit per the instructions on the following page. If the stand is
to be installed into a structure, refer to the instructions on page 18.
9