Procom PMM-01 - Manual (Page 4)

Data Sheet
PMS-01, PMS-02, PMK-16, PML-01, PMM01
Built-in Call Station, Compact and as Separate Components
The following two examples show how the individual components can be
connected together:
Wiring diagram 1:
PMS-01E with
7 keypads
PMK-16
WIRING DIAGRAM 2: PMS-02E with 7 PMK-16 WF (IP65) keypads
Optionally the microphone PMM-01 and/or the loudspeaker PML-01 can be
connected as separate components instead of the built-in microphone and/or
loudspeaker of the PMS-01.
PMM-01 und PML-01
A four-wire connection between call station electronics and the 4NSA in the
DVS-21 system are required to operate a PMS-01 and PMS-01 E. The built-in
call station is complete after at least one keypad has been built in.
To operate a PMS-02 a 6-wire connection to the LF interface module 4NSA
must be established so that the integrated booster amplifier can run. The call
station as separate components is completed by connecting at least one
keypad, one loudspeaker and one microphone.
Both models can be configured with the help of the system software ICS.
Date: 16.03.2009 Page: 4/9 Author: HS Document-No.: DB_PMS-XX_12XX_00
© 2008 ProCom, All rights and technical changes reserved