Data sheet, Mi4m – Procom MI4M User Manual
Page 4
Data Sheet
MI4M
Microphone Measurement Module
The LF level of the connected microphone determined by the module can
be transmitted to the service PC and displayed in ICS.
2 integration times can be set.
Integration time "Quick” or “Slow” is selected in the configuration software ICS
(depending on set).
A malfunction signal in the case of fuse outage can also be configured in the
ICS. For this a measuring microphone must be set as terminal for the corre-
sponding set.
The Front Plate Symbols and their Meaning:
The System Blinker
Addressing from processor taking place
I/O Input/Output
BUS input works as push-pull operation with the system blinker
BUS output works as push-push operation with the system blinker
Status Measuring
LED illuminated:
measuring taking place
(depending on set)
Fuse
LED off:
Fuse triggered
(depending on set)
Date:
26.03.2009 Page:
4/5 Author:
HS
Document-No.:
DB_MI4M_2332_01
© 2008 ProCom, All rights and technical changes reserved