Procom GG1_GG2_GGS_EG1_EG3 User Manual
Data sheet, Gg1/gg2/ggs/eg1/eg3, At a glance
Data Sheet
GG1/GG2/GGS/EG1/EG3
Basis and Expansion Units
The basis and expansion units (GGx and EGx) each consist of a 19 inch module
frame and a backplane.
The backplanes allow a custom, easy and quick installation.
At a Glance:
• D-sub connectors as interface to the outside world
• U-connectors for 6.3 mm flat pin bushing (48 V supply)
• Solder-in bridges for variable, application-specific wiring
⇒ Group assignment for the operating voltage
⇒ Different grounding options
⇒ Phantom power supply for call stations (four-wire
technology)
⇒ Disaster function of the V100 amplifier
• Expansion possibility on systems with 28 card slots
Date:
20.08.2008 Page:
1/5 Author:
HS
Document
No.:
DB_BPxxx_338x_01
© 2008 ProCom, All rights and technical changes reserved