iSound Theater Sound - Manual - Manual (Page 15)

15
BLUETOOTH SET UP
1. Switch on the Theater Sound. Press the SOURCE button and select
BT function.
2. The BT blue LED will flash 3 seconds and then stop for 30 seconds. It
is now searching for the last paired device.
3. If there is no device found, the blue LED will flash again. At this time,
you can pair with a new device. Turn on a Bluetooth enabled device
such as an iPod, iPhone, iPad, Blackberry, smartphone, computer…
etc. When a device is connected and paired with the Theater Sound,
it will show the name of F-3089N. Enter password 0000 to connect.
4. If the initial set up connection is successful, the next time the speaker
is turned on, the speaker will automatically pair to the last device it
was connected with.
5. If there is no Bluetooth enabled device found, the BT blue LED will
continue to flash non-stop.
NOTE:
1. The Theater Sound only connects to one device at a time. Turn off
the Theater Sound in order to pair it with another Bluetooth enabled
device.
2. The transmission range for the Theater Sound is a standard 10 me-
ters or 32 feet.
3. Interference may occur during playback when using the Bluetooth
connection near other wireless devices. If playback through Bluetooth
is problematic, move the Theater Sound and the audio device to a
different location, or use the 3.5mm audio cable to hardwire the con-
nection.