Anchor Audio RescueMAN Emergency System - Manual (Page 3)

MADE IN USA
SIX YEAR WARRANTY
RescueMAN Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
3 NOTE: System Can Be Used During Charging!
RECHARGEABLE BATTERY KIT (OPTIONAL ACCESSORY)
For applications where the RescueMAN PA system is used frequently, the RC-30 rechargeable battery
kit is available. This kit includes 10 rechargeable NiMH batteries and an AC charging adapter. When
fully charged the batteries provide approximately 12 hours of operation.
NOTE: New batteries must be charged for 6 hours prior to first use.
Using the RC-30 Recharge Kit
1. Install the 10 rechargeable NiMH batteries into the RescueMAN
(see above - Battery Installation)
2. Insert the charger plug into the Input Jack labeled DC IN on the RescueMAN control panel
3. Plug the AC adapter into a power outlet for 4-6 hours to fully charge
Cycling the Bbatteries
For extended battery life, we recommend you fully charge the batteries once each month during
periods of infrequent use. Always fully recharge batteries before storing.
CAUTION: NEVER recharge other types of batteries. Doing so can result in battery
explosion. Use only rechargeable Nickel-Metal Hydride (NiMH) batteries.
1. Remove the battery compartment cover located
on the back of the RescueMAN by unscrewing the
thumbscrew
2. Slide out the battery pack from the RescueMAN
battery compartment
3. Insert ten ‘AA’ size batteries (alkaline or RC-30
rechargeable batteries) into the battery pack
Position the ten batteries into the battery pack by
following the polarity labels on the battery pack
4. Slide-in the battery pack into the battery
compartment and push the battery pack all the
way in
5. Replace the battery compartment cover and
tighten the thumbsrew
BATTERY INSTALLATION
RC-30 Rechargeable Battery Kit