sE Electronics Munro Egg 150 - Manual (Page 4)

The Medium EGG 150 System
SOURCE
MAIN AUX SOFT O HARD
MIN MAX MIN MAX
MAIN AUX
MID EQ
Dual Input Amplifier (Control Unit)
Front Panel
Main Switch
An illuminated switch for the entire system allows safe power up and shut down without having to access the rear of each
individual Egg monitor.
Main Volume
A precision potentiometer allows continuous listening level control of the main input channel without need to access the
speakers.
Aux Volume
Independent control of the Aux Input volume gives a useful record/playback comparator (or any other
alternate source input).
Source
Source select allows the comparison of two independent inputs. Input sensitivity of the main input can be selected on the rear
panel.
Mid Eq
This three way switch allows instant comparison of the ‘flat’ reference response with a slightly harder mid range or a softer ‘HiFi’
setting. See page 4 for more information.
Headphone socket
An independent headphone amplifier is used to listen to whichever input is selected. Inserting the head phone jack mutes the
power amplifiers.
Headroom Indicator
An LED indicator designed to help protect your Egg system from overload. See Page 3 for more information.
1 2 3 4 5
6
1
2
3
4
5
6
Thank you for purchasing this sE Munro Egg 150 System, which was hand built in one of the most advanced microphone
manufacturing facilities in China. Conceived, designed and engineered in the UK and USA by Andy Munro, Siwei Zou
and James Ishmaev-Young and verified by extensive listening tests. Your system was constructed using the finest quality
electronic components and extensively tested to provide you with years of trouble-free operation.
Your Egg 150 System contains: 1 x Dual Input Amplifier / Control Unit
1 x Left Speaker
1 x Right Speaker
2 x 3m Speaker Cable
2 x Amp Rack Ears
The Egg 150 System
Operation Manual
1
7
7