PolyPlanar MA8505 - Manual

1352 Charwood Road • Suite D • Hanover, MD 21076 • Tel (410) 761-4000 • Fax (410) 761-6274 www.polyplanar.com
5.91” (150mm)
Overall Diameter
4.57” (116mm)
Cutout Diameter
1/8”
Hole Diameter
MA8505 Round Speaker Installation Guide
Cutout and use as template for drilling Installation: Find a suitable location making
sure there is clearance for the installed depth.
Use a hole saw or other suitable device to
make a cutout.
Place the speaker in the cutout and mark
and drill holes for the mounting screws
(supplied). If the panel is too thin or soft for
screws use the stainless screw clips in the
hardware kit.
Attach speaker wires supplied, solid color
wire to positive (red dot or with + sign or larger
tab as shown on the diagram).
Scale= 1:1
Reproduction may change
accuracy
Mounting Depth
2.28”
Cut-out gray area