PolyPlanar MR45C - Manual (Page 11)

11
Press MODE button to change to SIRIUS mode.
If there is no SIRIUS TUNER connected this mode will be skipped.
Please connect your SIRIUS Tuner to the SIRIUS port located at the back
of the unit. Then press MODE button to change to SIRIUS mode.
SELECTING A CHANNEL
Press
/ button to select a channel.
SEARCHING CHANNEL NUMBER MANNUALLY
Press A/PS button
―SR CH - - - ‖ will show on the display. Use the
PRESET 1, 2 and 3 buttons to select the desired channel number. When
finished, press SEL button to confirm and play.
Explain as follows:
- If you want to search channel number 176, you have to
press 1INT button one time to get 1, then press 2RDM button
seven times to get 7, then press 3RPT button six times to get 6.
-
Press SEL button to confirm and play.
SELECT A CHANNEL BY CATEGORY
First,
check if you see ―CAT‖ icon in the LCD. ―CAT‖ icon in the LCD will
indicate the Category mode is on. If Category mode is not ON, press and
hold A/PS button to turn ON Category mode. Once Category mode is ON,
press and hold
or button to navigate to all categories available
such as POP, ROCK, CLASSICAL, etc. Pick a category then the unit will
only show the selected category unless you press and hold A/PS button
again to turn off category mode
.
SELECTING THE FREQUENCY BAND
In SIRIUS mode, press BAND button to locate the desired band. The
reception band will change in the following order:
SR1 SR2 SR3
AUTOMATIC MEMORY STORING
The PRESET buttons can be used to store 6 channels in each band (SR1,
SR2 and SR3) for convenient access to your favorite channels.
1. Select the desired band.
2. Select the channel you want to store in memory, then press and hold one
of the preset buttons for 3 seconds until the corresponding preset button
number appears.