PolyPlanar ME60BT - Manual (Page 7)

ME60BT Bluetooth Amplifier 7
————————————————————————————
PO Box 409 Hanover, MD TEL (410) 761-4000 www.polyplanar.com
poly-planar
Marine Audio Systems
Switch & Gain Settings:
1) The switches and gain settings are secure behind a water resistant rubber
seal. Be sure to replace the cover when finished with adjustments.
2) The low Pass Filter switch allows the user to optimize bass performance
in the case a subwoofer is connected to channels 3 and 4. Poly-Planar
recommends use of the Poly-Planar MS55 compact box subwoofer for
excellent bass response. Push the low pass button in when connecting
rear channels to subwoofer. Use potentiometer to adjust subwoofer gain.
3) The Bass Gain Trim adjusts the bass level output of channels 3 and 4
when the LPF switch is depressed. As a rule, keep the gain setting as low
as possible while still insuring that the system will reach full output power.
Amplifier Switch and gain settings
BASS GAIN TRIM