Buyers 1801212 - Manual

Installation Instructions
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • buyersproducts.com
Warranty
Buyers Products Co. warrants all truck/trailer hardware manufactured or distributed by it, to be free from defects in material and workmanship for a period of one year
from date of shipment. Parts must be properly installed and used under normal conditions. Any product which has been altered, including modification, misuse, accident
or lack of maintenance will not be considered under warranty. Normal wear is excluded. The sole responsibility of Buyers Products Co. under this warranty is limited to
repairing or replacing any part or parts which are returned, prepaid, and are found to be defective by Buyers Products Co. Authorization from Buyers Products Co. must
be obtained before returning any part. No charges for transportation or labor performed on Buyers’ products will be allowed under this warranty.
1801212INST Rev. A
Bill of Materials
1 3018338 1 Hitch, F250/350 Pickup - Weld
2 3018395 2 Spacer Support
3 3018574 4 Plate, Nut Double
4 – 10 Screw, Hex Cap 5/8-11 x 2 GR5 ZN
5 – 8 Washer, 5/8" Regular Split Lock, ZN
6 3018560 4 Spacer, Small w/ Hole
7 3001127 2 Screw, HH Cap 1/3 -13 x 2 GR8 BLK OX
8 – 2 Nut, Nylock 1/2-13 Zinc
9 – 8 Washer, 5/8 SAE FLAT ZN
10 1801212-PS-FRAME 1 PS Frame
11 1801212-DS-FRAME 1 DS Frame
12 – 2 Nut, 5/8-11 Zinc
item part no. qty. description
1801212 2" Hitch
applications
Ford F250/350 Pickup - 2008 + models
Capacity
16,000 lbs. Maximum Gross Trailer Weight (MGTW)
1,600 lbs. Maximum Vertical Load (MVL)
1. Position the hitch against the frame aligning to the eight
(four per side) bolts holes from the frame and the Flush
alignment to the end of the truck-frame. You may have
to enlarge or drill the holes larger if not existed. The
existing holes should fit the double-nut plates provided.
2. Secure the hitch to the frame with eight 5/8” bolts and
eight 5/8” nuts along with flat washers and spring
washers.
3. Optionally, on the side of the Frame, attach the support
space to mount onto the frame. You may have to enlarge
or drill a new hole for this step.
4. Secure on to the frame with one 5/8” bolt and nut.
5. Secure on to the hitch with one ½” bolt and nut.
6. Torque all bolts to 120 ft-lbs.
1
2
4
10
11
9
5
8
6
7
3
FLUSH
ALIGNMENT
12
4
Fig. 1