Littelfuse LCE Series User Manual

Lce series, Transient voltage suppression diodes, Axial leaded – 1500w > lce series

Advertising
background image

Transient Voltage Suppression Diodes

© 2014 Littelfuse, Inc.

Specifications are subject to change without notice.
Revised: 01/24/14

Axial Leaded – 1500W > LCE series

AGENCY

AGENCY FILE NUMBER

E128662/E230531

The LCE Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.

Description

TVS devices are ideal for the protection of I/O interfaces,
V

CC

bus and other vulnerable circuits used in telecom,

computer, industrial and consumer electronic applications.

Applications

Features

Parameter

Symbol

Value

Unit

Peak Pulse Power Dissipation by

10/1000μs Test Waveform (Fig.1)

(Note 1)

P

PPM

1500

W

Steady State Power Dissipation on

Infinite Heat Sink at T

L

=75ºC (Fig. 5)

P

D

6.5

W

Operating Junction and Storage

Temperature Range

T

J

, T

STG

-55 to 150

°C

Note:
1. Non-repetitive current pulse , per Fig. 3 and derated above T

A

= 25°C per Fig. 2.

Maximum Ratings and Thermal Characteristics
(T

A

=25°C unless otherwise noted)

Agency Approvals

• Glass passivated chip

junction in DO-201
Package

• 1500W peak pulse power

capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%

• Fast response time:

typically less than 1.0ps
from 0 Volts to BV min

• Excellent clamping

capability

• Typical failure mode is

short from over-specified
voltage or current

• Whisker test is conducted

based on JEDEC
JESD201A per its table 4a
and 4c

• IEC-61000-4-2 ESD

15kV(Air), 8kV (Contact)

• ESD protection of data

lines in accordance with
IEC 61000-4-2 (IEC801-2)

• EFT protection of data

lines in accordance with
IEC 61000-4-4 (IEC801-4)

• Low incremental surge

resistance

• High temperature

soldering guaranteed:
260°C/40 seconds /
0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg)
tension

• Plastic package has

underwriters laboratory
flammability classification
94V-O

• Matte tin lead–free plated
• Ideal for data line

applications

• Halogen free and RoHS

compliant

RoHS

LCE Series

Uni-directional

Additional Information

Datasheet

Samples

Resources

Advertising