Littelfuse 586 Series - Manual

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/19/13
Enclosed Fuseholders > Circuit Board Mounted
Cartridge Fuse Holders
Compatible Fuse Types
5×20mm
5×25mm
Materials
Holder: Duroplastic (Phenolplast PF), black
Cap: Thermoplastic (Polyamide PA 6.6), UL 94 V-0,
black
Metal Parts: Copper alloy, corrosion protected
Terminals: solderable tinned
Electrical Data (23ºC)
Rated Voltage: 250V
Max. Current/Power: 6.3V / 2.5 W
Mounting (2) Solder pins0.5×1.1mm
Protection Class & Category IP 40 (IEC 60529)
Operating Temperature -25 °C to 70 °C (consider de-rating)
Stock Conditions 10 °C to 60 °C
Contact Resistance ≤ 5mΩ
Dielectric Strength 3 kV, 50Hz, 1 min., dry
Insulation Resistance > 10 3 MΩ (500 V DC, 1 min.)
Solderability
235 ºC, 3 sec. (Wave)
350 ºC, 1 sec. (Soldering Iron)
Soldering Heat Resistance 260 °C, 5 sec.
Minimum Cross Section Conducting path - 0.2mm 2
Marking 598, 250 V
Unit Weight 4,9 g (598) / 3,6 g (585) / 3,4 g (586)
Product Characteristics
Not for new designs; please refer to holder no. 831/834
Dimensions
M8x0,75
7,5
2
27 ±0,5
5
= =
10
0,5
1,1
a Cap
Holder Body
Printed circuit board
13
±0,3
12 ±0,3
12,5 12,5 Holes in the pcb
ш 1,3
ш 1,3 +0,1
+0,1
10
Circuit Board Hole Placement Dimensions
ø11
±0,2
9 ±0,5
M8x0,75
19,
5 -0,
5
4,2
±0
,2
Transparent site window
(For indicator fuse)
ш8,4
±0,1
ш11 ±0,2
9 ±0
,5
18,
5
-0,
5
4,2
±0
,2
M8x0,75
Slot width 1,8
ø8,4
±0,1
Note: 1.00 means the number one with two decimal places. 1,000 means the number one
thousand.
wITh SITE wINDOw
FOR 5×25MM FUSE SLOTTED TOP
FOR 5×20MM FUSE
598 series Holder
585 Cap 866 Cap
598 Series Circuit Board Mount Enclosed Fuse Holders for 5×20mm and 5×25mm Fuses
Ordering Information
Description Ordering Number packaging
Cap, 5×20 mm 585 0000 000 bulk 100
Cap, 2x25 mm 586 0000 000 bulk 100
598 Series Holder 598 0000 000 bulk 100
Additional Information
Datasheet Samples Resources