Littelfuse SLVU2.8-4 Series - Manual

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/24/13
TVS Diode Arrays
(SPA ® Diodes)
Lightning Surge Protection - SLVU2.8-4 Series
Description
Features
Applications
The SLVU2.8-4 was designed to protect low voltage,
CMOS devices from ESD and lightning induced transients.
There is a compensating diode in series with each low
voltage TVS to present a low loading capacitance to the
line being protected. These robust structures can safely
absorb repetitive ESD strikes at ±30kV (contact discharge)
per IEC61000-4-2 standard and each structure can safely
dissipate up to 40A (IEC61000-4-5, t
P
=8/20μs) with very
low clamping voltages.
Pinout
Functional Block Diagram
• ESD, IEC61000-4-2,
±30kV contact, ±30kV air
• EFT, IEC61000-4-4, 40A
(5/50ns)
• Lightning, IEC61000-4-5,
40A (8/20μs)
• Low capacitance of 2pF
per line
• Low leakage current of
1μA (MAX) at 2.8V
• SOIC-8 (JEDEC MO-012)
pin configuration allows
for simple flow-through
layout
• 10/100/1000 Ethernet
• WAN/LAN Equipment
• Switching Systems
• Desktops, Servers, and
Notebooks
• Analog Inputs
• Base Stations
5 6 7 8
4 3 2 1
Pin 1.3
Pin 2.4
Pin 6.8
Pin 5.7
RoHS Pb GREEN
Application Example
Ethernet
PHY
J1
J8
RJ-45
Connector
SLVU2.8-4
Device is shown
as transparent
for actual footprint
Case GND
Tx+
Tx-
Rx+
Rx-
SLVu2.8-4 Series 2.8V 40A TVS Array
Additional Information
Datasheet Samples Resources