Littelfuse SMOV25S Varistor Series User Manual

Varistor products, Smov25s varistor series, Thermally protected varistors > smov25s series

Advertising
background image

© 2013 Littelfuse, Inc.

237

Revised: May 8, 2013

Varistor Products

Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/smov25s.html for current information.

SMOV25S Varistor Series

Thermally Protected Varistors > SMOV25S Series

SMOV

25S

Series

RoHS

Description

Features

• Maximum single

surge capability 20 kA,
8/20 waveshape.

• Nominal Discharge

Current Value: 10kA.

• Intermediate current

rating: 50A/150A.

• -45°C to +75°C operating

temperature.

• Recognized to UL

1449 3rd edition.

• Lead-Free and RoHS

compliant.

• Integrated micro-switch for

indication circuitry/design.

Agency Approvals

Applications

• SPD applications

• AC/DC distribution

• IT/Data center

• Power supplier

• Telecommunication

Agency

Agency File Number

E320116

SMOV25S Varistor Series

The Littelfuse SMOV thermally protected varistor is a self-
protected device. It consists of a 25mm square varistor with an
integral thermal disconnect designed to open in the event of
overheating due to abnormal overvoltage as outlined in UL1449
3rd edition. The SMOV helps facilitate SPD module compliance
to UL1449 and offers quick thermal response due to the close
proximity of the integrated thermal element to the MOV body.
This configuration also offers lower inductance than most discreet
solutions resulting in improved clamping performance to fast over
voltage transients.

The device has a separate micro-switch, which can be used to
indicate that the MOV has been disconnected from the circuit. This
separate switch makes the monitoring circuitry completely isolated
from the main power which ensures indicator circuit safety and
simplifies the customers circuit design.

Absolute Maximum Ratings

• For ratings of individual members of a series, see Device Ratings and Specifications chart.

SMOV25S

Series

Units

Continous:

Steady State Applied Voltage:

DC Voltage Range (VM(DC))

150 to 970

V

AC Voltage Range (V

M(AC)RMS

)

115 to 750

V

Transient:

Non-Repetitive Surge Current, 8/20μs Waveform (I

TM

)

20,000

A

Non-Repetitive Energy Capability, 2ms Waveform (W

TM

)

170 to 670

J

Operating Ambient Temperature Range (T

A

)

-45 to +75

°C

Storage Temperature Range (T

STG

)

-45 to +85

°C

Hi-Pot Encapsulation (Isolation Voltage Capability)

2500

V

Isolation Voltage Capability (when the thermal disconnect opens)

1500

V

Housing Insulation Resistance

>1,000

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

Advertising