Ocean Optics USB-ISS-UV_VIS - Manual

175-00000-000-01-201208 1
USB-ISS-UV/VIS
Integrated Sampling System
Installation and Operation Instructions
Description
The USB-ISS-UV/VIS Integrated Sampling System is a snap-on, direct-attach 1 cm cuvette holder and
UV/VIS/NIR light source (200-1100 nm) combination created specifically for the USB4000
Spectrometer and the USB2000+ Spectrometer (and their predecessor, the USB2000 Spectrometer).
The deuterium tungsten light source receives control instructions via the accessory connector on the
spectrometer.
The USB-ISS-UV/VIS also contains a built-in cooling fan. Therefore, due to the increased power
requirements of the light source, the sampling system requires a separate 5-volt power supply
(included with the system).