Ocean Optics Ocean View Quick Start - Manual (Page 9)

OceanView Quick Start Instructions
000-20000-310-01-201305 9
o Color
o Photometry
o Concentration
o Energy, Power, Photons
• Load Project: Loads a previously saved project.
• Restore Previous Session: Reloads the Schematic and view window configurations as they
were when the software was closed.
• Quick View: Displays the spectrum in Quick View mode showing raw, unprocessed data
(previously referred to as Scope mode).
Note
OceanView has extensive context sensitive help. Click the Help button in any dialog
box for more details. Tooltips are also available by hovering over a button or window
for more information. Help is also available using the Help option in the top menu.
Run a Wizard
►
Procedure
1. Select Run a Wizard and click OK to open the Wizard selection dialog box.
2. Click Spectroscopy to open the Select Spectroscopy Wizard dialog box.
3. Select the processed mode you want to enter and click Next. The wizard will take you through
all the necessary steps to optimize your acquisition and enter the desired processing mode.
The wizards can also be accessed by clicking the Create a new spectroscopy application button
( ) or by selecting the File | Create a new spectroscopy application menu item.
Load Project
With the new persistence functionality and ability to save and reload projects, you can quickly enter a
processed mode by reloading a previously saved method.
►
Procedure
1. Select Load Project to view the list of previously saved projects.
2. Select the project you want to load and click OK. Your project will reload and even warn you
if you are reloading Reference or Background data that should be updated to ensure accurate
measurements.
Note
To load a project, you must have the same spectrometer(s) that were used to create the
project connected to the computer before you can load the project. The project will not
load if the spectrometers used to create it are not connected to the computer.