Ocean Optics D-2000 - Manual (Page 12)

2: D-2000 Specifications
4 000-10000-020-02-1209
Front Panel
Component Description
Deuterium On/Off
Press to turn the Deuterium lamp on or off. The bulb requires a warm-up time of
20 seconds before the Deuterium lamp is illuminated. You must allow the bulb to
warm up to receive accurate data from the lamp.
LED lights green upon successful illumination, or red to indicate lamp malfunction.
Power LED Indicates the power state of the D-2000.
Mechanical Protection –
SMA Connector
Covered to protect users from unintentionally looking directly at the beam of light.
Used for SMA connections only. Connect the fiber cable to the D-2000 BEFORE
turning the lamp on to avoid unnecessary exposure to UV radiation.
Always wear proper eye protection when using the D-2000 lamp.
Deuterium On/Off
Deuterium Lamp State
LED
Mechanical Protection –SMA
Connector
Power LED