Ocean Optics S1000 - Manual

Ocean Optics – S1000 Pin Outs Table
©2003 Ocean Optics, Inc.
S1000 Pin Outs
Pin Code Description Code
1
♦
Video out
•
- Required input for operation
2 nc
■
- Required input for ADC read
3
•
Ground
♦
- Outputs to ADC
4 s Ground s – Slave board interconnections
5 Ground
6 Ground All pins are numbered looking at
7 nc the edge of the card, with the
8 nc spectrometer and components
9 nc facing UP.
10
•
+5 VDC in
11 nc
12 nc
13 s phi 10 to pin 13 of slave
14 s phi RO to pin 14 of slave
15 s phi TG to pin 15 of slave
16 s phi SHO to pin 16 of slave
17 nc
18
♦
ADC Trigger Output
19 nc
20 Strobe Enable in
21 nc
22 nc
23 Strobe fire output (TTL) synchronized with linear array
24 nc
25
•
External Clock in (TTL)
26 Integration time control, LOW –short, HIGH –long (4x)
27 Integration time external divide control (must modify board)
28
■
Enable Array Read Input
29 nc
30 nc
31 nc
32 nc
33 nc
34 nc
35 nc
36 nc
37 nc
38
Integration time input (divided from pin 27) (must modify
board)
39 ADC trigger out/4 (D series only)
40 ADC trigger out/8 (D series only)
41 nc
42 ADC trigger out/12 (D series only)
43 s -12 VDC
44 s +12 VDC