Ocean Optics SERIAL-BT-ADP - Manual

SERIAL-BT-ADP Getting Started
Ocean Optics is offering the SERIAL-BT-ADP serial-to-Bluetooth TM adapters for replacing an RS-232
cable in your system with a wireless connection for operating at a distance of up to 300 feet (100 meters).
A pair of these Bluetooth devices works with an RS-232 serial interface to a computer, or other
equipment using serial data format, replacing a dedicated cable connection with no need for any software
changes.
The adapters are used in pairs to replace a direct serial data cable connection anywhere in your laboratory
or industrial system. Simply disconnect each end of the RS-232 cable and connect the correct adapters
(male or female) to the equipment at each end of the link. See the example below using an STS
spectrometer.
100-40000-032-01-201203b 1