Ocean Optics LS-450 - Manual (Page 22)

4: USB-LS-450 Blue LED Pulsed Light Source
8 009-00000-450-02-201105
Connecting the USB-LS-450
► Procedure
1. Align the male 10-pin accessory input on the USB-LS-450 with the accessory connector on the
USB2000-FL Spectrometer.
For the USB4000-FL Spectrometer, connect the USB-ADP-PX2 serial adapter to the
spectrometer’s accessory connector.
2. Secure the spectrometer and the USB-LS-450 together by firmly interfacing the accessory
connectors.
3. Insert the silver thumbscrew through the interface plate of the USB-LS-450 and tighten the
thumbscrew to secure the USB-LS-450 and the spectrometer together.