Ocean Optics LLS Series LED - Manual

300-00000-011-01-201301 1
LLS Series LED Light Sources
Installation and Operation Instructions
Description
Ocean Optics’ LED Series light sources (LLS) are engineered to be a versatile tool for scientific and
general lighting applications. Light is coupled directly into a fiber with the highest efficiency possible
via the SMA 905 connection. You can adjust the optical intensity in continuous (CW) and pulse
modes. The LLS Series support a ‘pulse mode’ to allow higher current and thus higher optical power
when in pulsed mode. The LLS module is designed to accommodate external control of intensity,
pulse and lamp on/off. This system also has the ability to have interchangeable light modules.
LLS Series Light Sources
LLS Models
LLS LED light sources are available in nearly 50 different wavelength options. See the table below for
a list of models.
Part Number Wavelength FWHM
Min. Power
Coupled into a 600
µ
m .22NA Fiber
Max. Drive
Current CW
Max. Drive
Current
Pulsed
Max. Duty
Cycle in
Pulsed
Mode
LLS-240 240 10 nm
2μW
20mA 200mA 1%
LLS-245 245 10 nm
2μW
20mA 200mA 1%