Set-up, Overview reflection set-up, Parts used reflection measurement set-up procedure – Ocean Optics RTL Reflection Stage User Manual
Page 13: Chapter 2, Overview, Reflection set-up, Parts used, Reflection measurement set-up procedure
Advertising
000-10000-170-02-1209
5
Chapter 2
Set-up
Overview
The Stage-RTL-T is very versatile and can be set up to measure the following:
Reflection
Reflection (upside down)
Transmission
Reflection Set-up
Use the Stage-RTL-T to measure reflection and reflection of a transparent sample.
Parts Used
Fiber holder
Sample holder (optional)
Light trap (optional)
Reflection Measurement Set-up Procedure
►
Procedure
1. Affix the reflection probe in the fiber holder.
2. Adjust height of the fiber holder.
3. Place your sample on the sample holder or on the base plate.
4. Start acquisition.
Advertising