Windows 2000 device driver installation – SENA DirectPort UPCI User Manual
Page 10
Advertising
10
DirectPort UPCI Software User Guide Rev.1.0
Windows 2000 Device Driver Installation
1. Turn off your PC and insert DirectPort board into PCI slot.
2. Turn on the PC and insert the install CD.
3. Start Windows 2000 and Log on as administrator.
4. “Found New Hardware Wizard” appears after booting as below:
5. Press the “Next” button.
6. Select the “Search for a suitable driver for my device (recommended)” and press the “Next” button.
Advertising