Mustang Motorcycle Seats One-Piece Deluxe DayTripper Seat - Yamaha Raider - Manual

Installation Instructions for Mustang
One-Piece Seat
on 2008-2011 Yamaha Raider
Removal of stock seat
1. Use ignition key to unlatch front of driver’s seat. Pull
front of seat up and pull seat forward to disengage it
from the fender bracket.
2. Remove the two bolts at the front of the rear seat.
3. Then pull rear seat forward and off of its fender bracket.
4. Remove the center bracket from the rear fender. Re-
place bolts in fender after removing bracket.