Mustang Motorcycle Seats Studded Tank Bib - Yamaha Road Star - Manual

These steps are guidelines to help you install your new Mustang product. If you need further
assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30 Eastern or send an
e-mail to [email protected] or visit our website at www.mustangseats.com.
For care and maintenance of our seats, please go to our website under "Support".
Ref. part #’s 93151, 93152
Mounting Suggestions
Yamaha Road Star 1600 & 1700
Tank Bib
Tools Required:
• Metric Allen Wrenches
• Metric Sockets
Hardware:
• None
Mounting of Mustang Tank Bib
1. Remove seat and three dash mounting screws.
2. Lift dash just high enough to place cutout in
ELE
over
mounting boss on tank.
3. Reinstall dash.
4. Clip bottom of tank
ELE
to tank's flange under seat
5. Reinstall seat.
Studded Tank Bib Plain Tank Bib
Plastic U-Clip is sewn to
ELE
Enjoy the custom look of your new Mustang Tank Bib!