Mustang Motorcycle Seats Studded Tank Bib - Yamaha V-Star 650 Classic & Custom User Manual
Mustang Motorcycle Seats For motorcycles
Installation Instructions for Mustang
Tank Bib
on 1998-2011 Yamaha 650 V-Star
Classic and Custom
These steps are guidelines to help you install your new Mustang product. If you need
further assistance please call us at 800-243-1392, Monday through Friday 9:00 - 5:30
Eastern or send an e-mail to
or visit our website
at
www.mustangseats.com.
For care and maintenance of our seats, please go to our website under
"Support".
Ref. part #’s 93147,93148
Installation of tank bib
1. After seat has been removed, remove the three Allen
screws from the chrome dash.
2. Lift the chrome dash about an inch, and work the tank
bib over the dash until the dash has come fully through
the large opening in the tank bib.
3. Align hole in tank bib with the lower screw hole in the
tank as shown. Install and tighten all three Allen
screws.
4. Clean underside of gas tank and then apply the self-
adhesive velcro end of the tank bib to the bottom of the
tank as shown.