Mustang Motorcycle Seats Studded Solo Seat with Driver Backrest, Black Studs Harley-Davidson FLHR User Manual
Mustang Motorcycle Seats For motorcycles
Mounting Suggestions
Harley-Davidson® Road King 1994-1996
Solo Seat
Hardware:
• White Flat Nylon Washer x 2 (Included)
Baseplate Features:
The solo features a 16 gauge formed steel baseplate with rubber
bumpers to minimize vibration and prevent it from touching the frame.
It is a direct replacement for the stock solo. Two chrome mounting tabs
that align with the fender inserts/studs.
Stock Two-Piece Seat Removal Steps
1. Remove the rear fender screw.
2. Slide the passenger seat back and up.
3. Remove solo mounting bolts located at the back of the solo.
4. Slide the solo seat back and up to remove.
Stock Solo Seat Removal Steps
1. Remove solo mounting nuts.
2. Slide the solo back and up to remove.
Stock One-Piece Seat Removal Steps
1. Remove the rear fender screw.
2. Remove hand strap that is secured to the motorcycle on each side of the seat where the
front saddle bag mount is located.
3. Slide the stock seat back and up.